Restocking 21 days delivery time estimated
alveoONE-R – assembled –
The recycling filtering kit for 3D printer
The most affordable and ready to use filtering system for 3D printers. it removes bad smells from printing and provides high protection against harmful emissions.
alveoONE-R is a free stand filterbox for you 3D printer enclosures. This kit will be printed, assembled and tested by us.
VOCs (volatile organic compounds: toxic gas), UFPs (ultrafine particles: nanoparticles). 3D printers are registered as high harmful emitters.
Made for 3D Printers
Our HEPA filter P3D is designed for 3D printer emissions. 2 in 1 filter for the best protection against VOCs and UFPs.
Our solution is evolving to provide you more control and information to bring you an efficient protection.
For airtight enclosure
alveoONE-R is a recycling filterbox for 3D printer which can be placed in the enclosure.
- keep a higher temperature
- Significant noise reduction
- Easy to move
- Printing time reduced
alveoONE-R is a free stand type for 3D printer in airtight enclosure. Recycling air type filterbox.
Less than 160 mm high, and not even 100 mm thick.
A free stand type let you choose the best position for your enclosure.
In an enclosure the fan noise is reduced.
Ready to Use
Ready in a second, place in your enclosure and turn it on.
Easy filter replacement
Only 30 secondes is enough to change the filter.
Recycling air is high filtering efficiency, the air will pass many times trought.
HEPA Filter P3D
We designed our filter, especially for 3D printers. They have 3 to 6 months lifetime according to your printing time and materials you print.
- easy filter replacing
- highly reduce odours
- caught UFPs & VOCs
Protect yourself is a must, we are surrounded by too many pollution sources, avoid 3D printing source is simple with Alveo3D. Look at the filter after only 200 hours of printing.
P3D filter 2 in 1: hepa H13 and Activated Carbon
DC power supply 12V
Screw bundle M4
High Pressure Fan: 120 mm 12V
V1 Electronic Board linked with V2 controller
Sealing EPDM cord to ensure no airleaks
Easy To Install
alveoONE-R is very easy to install and the filter can be replaced in 30 seconds very quickly.
Dimensions et Weight
HxLxW : 152*132*90mm
Assembled kit weight : 700g
Treatment VOCs (Volatile Organic Compounds): Gas
Treatment UFPs (Ultr fine particles): Nanoparticles
Ready to use. Mount and start.
DC Power supply 230v-12v
Sealing EPDM cords
Fan 12v 120*120*25mm
V1 Electronic Board 12v
Power and consumption
Voltage : 12v
Power : 10W
Operationnal telltale : superGreen LED
1m away from alveoONE outside enclosure : 57dB
1m away inside enclosure : 48dB
Product in Stock
Get it Now
Don’t miss the opportunity to protect yourself and print in
Available on back-order