The AlveoPRO adaptation kit for H2D/H2C/H2S
The AlveoPRO adaptation kit is designed to seamlessly integrate the AlveoPRO air filtration system with Bambu Lab H2D, H2C, and H2S printers, including full compatibility with the AMS system.
This kit enables efficient extraction and filtration of printer chamber air, helping to reduce fumes, particles, and odors generated during 3D printing.
Kit Contents :
- Slide-out bracket – opens or closes the air circuit depending on the filament used
- Air outlet bracket – connects the printer exhaust to the filtration system
- Air inlet bracket – connects the waste outlet to the filtration system
- Semi-rigid hoses (25 cm, 75 cm, 100 cm) – flexible air and waste routing
- Waste evacuation cap – easy waste collection and emptying
- TPU seals – airtight connections
- Mounting screws & Torx driver – everything needed for installation
54,00€ Inc. VAT
Livraison en Europe
En stock : Expédition 2-3 jours
Client feedback
FAQ:
Do you have some recommended fan speeds for PLA/PETG and ABS/ASA?
We recommend keeping the fan speed low during printing (ideally between 10–15%), regardless of whether you are using PLA, PETG, ABS, or ASA. The H2D chamber size is a small volume for the AlveoPRO. For PLA and PETG specifically, please remember to unplug the air return guide to prevent the chamber from overheating. Once the print is finished, you can increase the fan speed to maximum to quickly filter the remaining air concentration inside the chamber.
Is it necessary to remove the air outlet slats?
And what about the exhaust fan setting of the Bambu? All on auto?
The exhaust fan must remain in place and continue to operate normally. You may see a warning on the H2D display after removing the slats, but it will not affect the printing process.
